|TO ORDER OR PRICES
SCROLL DOWN HOW TO
PICK THE RIGHT SEALER
FOR YOUR NEEDS
|WHY BUY FROM US ? Family owned since 1979 - ONE YEAR FACTORY WARRANTY PLUS
Parts & Service ? We Have it all. Our warehouse in the U.S.A. has all types of parts & we offer
service on all machines we sell. The finest #1 selling Impulse Sealers made under the strictest
quality controls. Makes perfect seals on Polyethylene, Pliofim, P.V.A., Polyurethane, Kel-F, Tyvek,
PVC, Polyflex, Saran, Polypropylene, Mylar, Nylon and other heat sealable materials. Plastic Bag
SEALERS From 4" SEAL to 40" SEAL Simply set the timer, insert bag between the sealing bars,
press down, and release. Round Wire for Cut & Seal available on most sealers.
For- Foot or Automatic Bag sealers click on links above. For prices and to ORDER SCROLL
|FOR Hand Sealer PARTS
CLICK HERE Replacement Kits &
Parts are available for all sealers we sell.
All Parts in stock.
|These hand impulse sealers seal
poly bags and any thermoplastic
materials quickly and efficiently. No
warm up time is needed. Depending
on the model of the machine,
materials up to 40" wide and 10 mil
thick can be sealed. The seal width
rangically beeps when seal is done.
Once the timer is set, it will give a
consistently flat seal. Easy to
operate. Simply set the timer, insert
bag between the impulse sealing
bars, press down, and release.
Round Wire for Cut & Seal available
on most impulse hand sealers.
|Hand held direct heat sealers wide
strong seal for foil,coffee or heavy
Sealers Unlimited‘Since 1979’
Hand Impulse Sealers-Foot Sealers-Vacuum Sealers -
Plastic bag sealing equipment all types in stock.
Ph (760) 522-8389 Fax (760)-477-6238
Industrial Vacuum Sealers-Impulse Sealers-Bag Sealers & Parts for bag sealers.Automatic bag sealers.
|NEW wall mounted
impulse sealer for
Liquids & Powders
|Z-300DX is a stainless steel hand sealer.
It can be used either as a table top sealer or
wall mounted sealer to
do vertical sealing.
Ideal for powder and liquid sealing. It has a
and a stainless steel platform.
Clean Room Approved
Order InformationItem Number Z-300DX
Specifications Seal Length 12"
Seal Width 2.7mm Power 380w
Replacement Kit RK-12H(Z)
NEW LOWER Price
Impulse Sealers - Adding a dwell step to
the sealing process
The most common question we receive
from our dealers and your customers is:
Why does the seal appear over-melted
or under-melted when using an
impulse sealer ?
The key is the DWELL process.
Because impulse sealers are manual
sealers, a manual dwell step must be
added to your sealing process to make a
Hold the upper jaw or seal arm down
for an additional 2-4 seconds after the
light goes off to set or congeal the seal.
This will ensure a beautiful looking
|Hand Impulse Sealers For All Aplications